The Touch Series LED strip light remote control enables you to control your RGB strip lights with the tip of your finger.
With the all new color spectrum wheel you can now get the perfect color needed to set the mood or ambience you desire. Not only can you change color but you can also control the brightness, and mode from this sleek radio control. No need for hard pushing or sticky buttons.
There are 18 different modes that allow for pulsing, flashing, flickers as well as all the static colors.
Looking to find a very specific color?
If specific color control is what you are looking for then this product is 100% the one for you.
Features of the RGB Touch Remote
Used to control RGB strip lights. Easily change the modes of the strip light to solid colors, to light shows and color mixing.
Number | MODE | Number | Mode |
1 | Static Red | 10 | 3-Color Gradient |
2 | Static Green | 11 | 3-Color Smooth Fading |
3 | Static Blue | 12 | 7-Color Gradient |
4 | Static Yellow | 13 | 7-Color Smooth Fading |
5 | Static Purply | 14 | 3-Color Flicker |
6 | Static Cyan | 15 | 7-Color Flicker |
7 | Static White | 16 | 3-Color Flash |
8 | 3-Color Jump | 17 | 7-Color Flash |
9 | 7-Color Jump | 18 | Chameleon |
Technical Parameters
Can I have more than two remotes in one area?
Yes, you can. However, we have rarely seen that there is some RF interference from the other remote. If this happens, you need to turn off one set of lights while changing the others. To eliminate this, get a signal amplifier so you can control long distance RGB strip light runs with one remote control.
Can this product colors like pink and orange?
YES! With the dynamic color wheel you can create almost any color you desire!
Do I need line of site to change colors og my LED strip lights from the remote and control box?
No, RF (Radio Frequency) does not require line of sight. You can use this through walls and over 75 feet with no obstacles.