RGB Touch Series Remote
Product Description
Color Changing LED Strip Light Remote: Touch Series
The Touch Series LED strip light remote control enables you to control your RGB strip lights with the tip of your finger.
With the all new color spectrum wheel you can now get the perfect color needed to set the mood or ambience you desire. Not only can you change color but you can also control the brightness, and mode from this sleek radio control. No need for hard pushing or sticky buttons.
There are 18 different modes that allow for pulsing, flashing, flickers as well as all the static colors.
Looking to find a very specific color?
If specific color control is what you are looking for then this product is 100% the one for you.
Features of the RGB Touch Remote
Used to control RGB strip lights. Easily change the modes of the strip light to solid colors, to light shows and color mixing.
Technical Parameters
Input voltage: DC 12-24V
Output channel: two signal output (6A/3channel) = total 216W(12V DC) or 432W (24V DC)
Brightness Levels: 10
Max remote distance: 75ft without barrierrs
Controller: RF RGB Touch Controller--Uses (3) AAA batteries
Radio Frequency: 433MHz
Working Temperature: -30C to +60C
Dimensions: 3 1/4" x 3 1/4" x 1 3/8"
Can I have more than two remotes in one area?
Yes, you can. However, we have rarely seen that there is some RF interference from the other remote. If this happens, you need to turn off one set of lights while changing the others. To eliminate this, get a signal amplifier so you can control long distance RGB strip light runs with one remote control.
Can this product colors like pink and orange?
YES! With the dynamic color wheel you can create almost any color you desire!
Do I need line of site to change colors og my LED strip lights from the remote and control box?
No, RF (Radio Frequency) does not require line of sight. You can use this through walls and over 75 feet with no obstacles.
